
手機號碼:19121166298
地 址:上海市北京東路668號科技京城東樓27樓C1室
BALLUFF感應式傳感器選型工作
更新時間:2017-05-03 點擊次數:596次
概覽
組件
感應式傳感器應用示例
插接器與連接導線 感應式傳感器 適合的固定件
這些產品可用于在自動化技術 中對過程進行控制、定位與 檢查。
耐用的傳感器能夠探測 金屬目標。
優勢
非接觸,無磨損,耐臟, 防短路
可提供從直徑3 mm至80x80 mm 的六面體結構
感應式傳感器 - 貼合您的要求
Keyfeatures
Size | D10.0e7 |
---|---|
Connection | Cable, 1m, PUR |
Switching output / function | PNP/Normally open (NO) |
Operating voltage | 10...30 V DC |
Special properties | High-pressure-rated |
Mechanical installation condition | Flush (shielded) |
Rated operating distance Sn | 1,5 mm |
General attributes
Ready delay tv max. | 50 ms |
---|---|
Utilisation category | DC 13 |
Switching freq. f max. | 2000 Hz |
Temp. drift max. (% of Sr) | 10 % |
Repeat accur. R max. (% of Sr) | 5 % |
Power indicator | No |
Basic standard | IEC 60947-5-2 |
Function indicator | No |
Short-circuit protected | Yes |
Enclosure Type per IEC 60529 | IP67 |
Protected against polarity reversal | Yes |
Protected against miswiring | Yes |
Part number sealing ring | 184385 |
Part number thrust ring | 705918 |
Additional text | The sensor is functional again after the overload has been eliminated. Installation instructions 614804. |
Electrical attributes
Output resistance Ra | 150.0k |
---|---|
Rated operating voltage Ue DC | 24,0 V |
Effective operating current Ie | 200 mA |
Rated insulation voltage Ui | 75 DC |
Rated short circuit current | 100 A |
Electrical version | DC, direct current |
Hysteresis H max. (in % of Sr) | 15 % |
Minimum operating current Im | 0 mA |
Load capacitance max. (at Ue) | 1 µF |
No-load current Io damped max. | 8 mA |
Max. no-load cur. Io undamped | 3 mA |
Off-state current Ir max. | 10 µA |
Ripple max. (% of Ue) | 15 |
Switching output | PNP |
Switching function | Normally open (NO) |
Voltage drop static max. | 2 V |
Operating voltage | 10...30 V DC |
Mechanical attributes
Ambient temperature | -40...100 °C |
---|---|
Number of conductors | 3 |
Tightening torque | 20 Nm ±10 % |
Pressure resistance | oilpressure-rated to 350 bar |
Assured operating distance Sa | 0...1,2 mm |
Cable short designation | Li9Y11Y |
Cable length | 1 m |
Conductor cross-section | 0.25 mm² |
Eff. switching distance Sr | 1,50 mm |
Shock rating | Shock, half-sinus, 30 gn, 11ms |
Vibration rating | 55 Hz, 1 mm ampl., 3x30 min |
Degree of contamination | 3 |
Sensing surface material | EP |
Sealing ring material | HNBR 70 |
Housing material | 1.4104 |
Cable jacket material | PUR |
Cable diameter D max. | 3,8 mm |
Size sealing ring | 5.3 x 2.4 |
Thrust ring material | PTFE |
Tolerance Sr | ±10 % |
Mounting hi-pressure switches | M12x1 |